Advertisement
● Read retry timeout
Set the timeout period during which RFID tag read retries
are allowed, with the [UP] or [DOWN] key.
9.9 sec.
has retried for the maximum number of times within the
9.8 sec.
RFID read retry timeout, the printer stops the retries at this
time.
Whenever the printer writes data onto an RFID tag,
0.1 sec.
the tag is read first. The read retry timeout set by this
0.0 sec.
parameter also becomes effective in this pre-read.
(Default value: 4.0 seconds)
(4) WRITE RETRY
Set the maximum number of retries to write data onto
●The number of times
an RFID tag.
a tag write is retried
The printer retries to write data onto an RFID tag for
255
up to the specified number of times. If the timeout
period expired before the maximum number of retries
254
have been done, the printer stops the retries at this
time.
1
(Default value: 5 times)
0
● Write retry timeout
Set the timeout period during which RFID tag write retries
9.9 sec.
are allowed, with the [UP] or [DOWN] key.
If the printer has retried for the maximum number of times
9.8 sec.
within the RFID write retry timeout, the printer stops the
retries at this time.
0.1 sec.
(Default value: 2.0 seconds)
0.0 sec.
© 2017 TOSHIBA TEC CORPORATION All Rights Reserved
1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562, JAPAN
If the printer
PRINTED IN JAPAN
EO2-38118
15/15
Advertisement
