Beyerdynamic XELENTO WIRELESS Quick Start Manual page 16

16 Xelento wireless – In-Ear Headphones
Charging
• By slightly turning, pull the alu-
minium cap
in the direction of the cable to
access the USB connector
• Connect the Xelento wireless to
any USB-compliant,
carrying USB connector (such as
a USB power supply) by using the
supplied USB charging cable.
• During charging the LED
remote control slowly flashes red.
As soon as the LED
nently red, the battery is fully
charged.
• After charging, remove the USB
charging cable and cover the USB
connector
cap.
of the battery pack
voltage-
of the
is perma-
with the aluminium
.