Step 6; Wall Strap Installation - Mocka Sadie Console Table Assembly Instructions Manual

Sadie Console Table
Assembly Instructions
9
Wall Strap
Attach 1x safety strap (V) and 1x washer (Z) to panel [1] and secure
with 1x screw (W). Tighten with a screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
V
Z
W
V
Z
W
10
Z
X
Y
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the
wall using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit
is balanced and steady before use. You're done, enjoy!
X
Z
Y
6