Factory Default Settings - Unitech ShuttleC User's Installation And Configuration Manual

Scantech-ID Shuttle C SG-15
APPENDIX D FACTORY DEFAULT SETTINGS
Currently, the Factory Default Settings are as follows:
DHCP
IP Address (when no DHCP service)
Subnet mask
Default Gateway
IP Address Remote Host
TCP Port
UDP Port
Baudrate internal scanner
TCP Connect Mode
Wait for host after scanning barcode
Display Message Timeout
Font Code page
WiFi mode
WPA Key
WiFi SSID
WiFi Authentication
Real time clock
Bar Code Symbologies active
The PC55 Colour can be returned to Factory Default Settings by:
• the button on the Main:System Configuration Page or
• the special barcode in Appendix N.
Colour
Enabled
192.168.1.200
255.255.255.0
192.168.1.254
192.168.2.60
9101
9101
9600
Client
3 seconds
5 seconds
UTF-8
(Unicode Transformation Format)
Infrastructure
empty
empty
wpa-psk
NTP Client enabled, Universal timezone
EAN-13, EAN-8, UPC-A, UPC-E
(omni-directional scanner)
(SGPriceChecker appl.)
"
"
69