Bar Code Setup Menu …………… 4 1 Device Selection and Default 2 Beep and Delay 3 Keyboard Wedge …………… 8 4 RS232 Serial Setting 5 Scanner 6 Data Format 7 Symbologies(I): Code 39/I2 of 5/ S2 of 5/Delta Distance Code/Code 32 ……………...
8 Symbologies(II): Code 128 / MSI / Code 93 / Codabar /Label Code 9 Symbologies(III): UPC/EAN Function Code for PC Function Code for MAC Function Code for IBM Terminal Full ASCII Table Test Chart Setup Procedures 1) Locate a group that contains the parameters to be changed.
The following label is called “dump settings” label. Scan that label, the settings of a scanner will dump to the screen as one or several ASCII string(s). Printing the string(s) into bar code labels in Code 39, you get the batch setup labels to duplicate other scanner.
Bar Code Setup Menu 1 Device Selection and Default Factory Default Enter Group 1 Group Default Exit...
Page 5
Keyboard Wedge Reader Device IBM PC/XT IBM PC/AT, PS/2 mod 40, 60, 80 etc. IBM PS/2 MOD 25, 56, 70, 90 IBM 5550-5P IBM 5550-6P IBM 3196/3197 122 Keys IBM 3476/3477 122 Keys IBM 3179/3471/3472 IBM 3486/3487 Keyboardless Wedge Macintosh ADB bus Device RS232 Serial Decoder Wand Emulation Reader...
Beep Tone (On Decoding): None Medium Beep Tone (On ACK): None Medium Inter-Character Delay: 1 ms 5 ms 10 ms Inter-Block Delay: 10 ms 50 ms 100 ms High Low to High High to Low High Low to High High to Low 20 ms 50 ms 100 ms...
5 Scanner Enter Group 5 Group Default Review Exit...
Page 13
Double verification: Label Type: 0 Positive Output of Wand: Bar High / Space Low Bar Low / Space High Level Duration: 200 us 1 Positive and Negative 600 us...
6 Data Format Enter Group 6 Group Default Review Exit Default Code ID Table Sym- bology UPC-A UPC-E EAN-13 EAN-8 I 2 OF 5 S 2 OF 5 Code 39 Codabar Code93 Code 128 Code 11 If the “User Defined” option is selected, the default ID is Set1.
Terminator: Enter (CR/LF) Field Exit(CR) Code ID: None User Defined Define Code ID: 00 Code 39 Full ASCII 01 Code 39 Standard 02 EAN-13 03 UPC-A 04 EAN-8 05 UPC-E 06 I 2 of 5 Data Length: Exclude Preamble: Scan “PP” to program preamble.
7 Symbologies(I): Code 39/I2 of 5/ S2 of 5/Delta Distance Code/Code 32 MM Minimum Length Review Code 32: Disable/Enable Leading Character Send / No Send Trailing Character Send /No Send Enter Group 7 Group Default NN Maximum Length Exit...
Code 39: Disable/Enable Check Digit Calculate and Send Check Digit Calculate but Not Send Check Digit Not Calculate Send/Not Send Start & Stop 0~48 Min 0 / Max 48 Interleaved 2 of 5: Disable/Enable Fix Length On/Off (by first three reads) Check Digit Calculate and Send Check Digit Calculate but Not Send Check Digit Not Calculate...
8 Symbologies(II): Code 128 / MSI / Code 93 / Codabar /Label Code MM Minimum Length Review Enter Group 8 Group Default NN Maximum Length Exit...
Page 19
Code 128 / Label Code: Disable/Enable MSI / Plessey Code: Disable/Enable CD Double Module 10 CD Double Module 11 Plus 10 CD Module 10 or 11 1-16 Min 1 / Max 16 Code 93: Disable/Enable Code 11: Disable/Enable CD Send / No Send 1-48 Min 1 / Max 48 Codabar:...
9 Symbologies(III): UPC/EAN Enter Group 9 Group Default Review Exit...
Page 21
UPC-A: Disable/Enable First Digit Send / No Send CD Send / No Send UPC-E: Disable/Enable First Digit Send / No Send CD Send / No Send Zero Expansion On / Off EAN-13: Disable/Enable First Digit Send / No Send CD Send / No Send ISBN Enable / Disable EAN-8: Disable/Enable...
Function Code for MAC F1 (%VA) F3 (%VC) F5 (%VE) F7 (%VG) F9 (%VI) F11 (%VK) F13 (%VM) F15 (%VO) Cursor Right (/FC) Cursor Up (/FE) page up (/FG) Ttab (/FI) F2 (%VB) F4 (%VD) F6 (%VF) F8 (%VH) F10 (%VJ) F12 (%VL) F14 (%VN) Cursor Left (/FD)
Page 25
Esc (/FK) return (/FM) Option Make (%VP) Option Break (%VQ) Control Make (%VR) Control Break (%VS) Shift Make (%VT) Shift Break (%VU) Apple Break (%VW) Apple Make (%VV)
Page 32
` (%W) b (+B) d (+D) f (+F) h (+H) j (+J) l (+L) n (+N) p (+P) r (+R) t (+T) v (+V) a (+A) c (+C) e (+E) g (+G) i (+I) k (+K) m (+M) o (+O) q (+Q) s (+S) u (+U)
Page 33
x (+X) y (+Y) z (+Z) {(%P) | (%Q) } (%R) ~ (%S) DEL (%T)