Unitech MS832 User Manual

2d imager scanner

Hide thumbs Also See for MS832:

Quick reference manual (2 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

Table of Contents

Quick Links

Need help?

Do you have a question about the MS832 and is the answer not in the manual?

Questions and answers

Summary of Contents for Unitech MS832

Page 3 – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 4 This device conforms to RoHS (Reduction Of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 5 Use only the adapter supplied. Using the wrong adapter may damage the unit and will void the warranty. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 6: Table Of Contents
Keyboard Style ........................15 Keyboard Conversion ......................17 Control Character Output...................... 17 Keyboard Modifiers....................... 18 Chapter 3..........................20 Input/Output Settings......................20 Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 7 To Clear One or All Prefixes or Suffixes ................35 To Add a Carriage Return Suffix to All Symbologies............36 Prefix Selections ........................36 Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 8 Straight 2 of 5 IATA (two-bar start/stop) ................63 Matrix 2 of 5 .......................... 64 Code 128 ..........................65 GS1-128 ..........................67 Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 9 Test Menu ........................... 103 Chapter 9..........................104 Product Specifications ......................104 Unitech MS832 Scanner Product Specifications..............104 Standard Cable Pinouts ...................... 105 Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 10 ASCII Conversion Chart (Code Page 1252) ............... 115 Code Page Mapping of Printed Bar Codes................. 117 Unicode Key Maps......................119 Appendix..........................125 Worldwide Support ......................125 Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 11: Chapter 1
A scanner can be connected to the USB port of a computer. 1. Connect the appropriate interface cable to the device first, then to the computer. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 12: Connecting With Keyboard Wedge
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with a USA keyboard. A carriage return (CR) suffix is added to bar code data. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 13: Reading Techniques
Menu Bar Code Security settings. Please contact the nearest technical support office (see Customer Support on page 110) for further information. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 14: Setting Custom Defaults
Any settings that have not been specified through the custom defaults will be defaulted to the factory default settings. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 15: Resetting The Factory Defaults
Remove Custom Defaults bar code, then scan Activate Defaults. This resets the scanner to the factory default settings. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 16: Chapter 2
The following Laptop Direct Connect bar code also programs a carriage return (CR) suffix and turns on Emulate External Keyboard (page 17). Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 17: Usb Ibm Surepos
Scan one of the following codes to program the scanner for USB PC Keyboard or USB Macintosh Keyboard. Scanning these codes also adds a CR and LF. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 18: Usb Hid
USB HID Scan the following code to program the scanner for USB HID bar code scanners. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 19: Keyboard Country Layout
United States: @ | $ # { } [ ] = / ‘ \ < > ~ Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 25: Keyboard Style
This programs keyboard styles, such as Caps Lock and Shift Lock. If you have used Keyboard Conversion settings, they will override any of the following Keyboard Style settings. Default = Regular. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 26 Caps Lock key cannot be used to toggle Caps Lock. The NumLock option works similarly to the regular Autocaps, but uses the NumLock key to retrieve the current state of the Caps Lock. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 27: Keyboard Conversion
0D. Refer to ASCII Conversion Chart (Code Page 1252) on page 115. Only codes 00 through 1F are converted (the first column of the chart). Note: Control + ASCII Mode overrides this mode. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 28: Keyboard Modifiers
00-1F, but it does not transmit any prefix or suffix information. Default = Control + ASCII Mode Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 29 Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style terminal and the system is dropping characters. Default = Off Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 30: Chapter 3
Scan the Trigger Click Off code if you don’t wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Trigger Click Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 31: Good Read And Error Indicators
Beeper Volume – Good Read The beeper volume codes modify the volume of the beep the scanner emits on a good read. Default = High. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 32: Beeper Pitch - Good Read
Beeper Duration – Good Read The beeper duration codes modify the length of the beep the scanner emits on a good read. Default = Normal. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 33: Led - Good Read
(1-9) bar code and the Save bar code on the Programming Chart inside the back cover of this manual. Default = 1. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 34: Good Read Delay
When in manual trigger mode, the scanner scans until a bar code is read, or until the button is released. Default = Manual Trigger-Normal. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 35: Presentation Mode
Top of Presentation Centering Window, Bottom of Presentation Centering Window, Left, and Right of Presentation Centering Window bar codes. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 36 Note: A bar code needs only to be touched by the centering window in order to be read. It does not need to pass completely through the centering window. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 37: Mobile Phone Read Mode
Note: To turn off Mobil Phone Read Mode, scan the Manual Trigger Mode bar code (see page 24). Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 38: Hands Free Time-Out
Use shorter delays in applications where repetitive bar code scanning is required. Reread Delay only works when in Presentation Mode (see page 25). Default = Medium. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 39: User-Specified Reread Delay
Top of Centering Window, Bottom of Centering Window, Left, and Right of Centering Window bar codes. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 40 Note: A bar code needs only to be touched by the centering window in order to be read. It does not need to pass completely through the centering window. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 41: No Read
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the output message (see Data Formatting beginning on page 40). The hex code for the No Read symbol is 9C. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 42: Video Reverse
Note: Images downloaded from the unit are not reversed. This is a setting for decoding only. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 43: Working Orientation
Use the working orientation settings if your direction-sensitive codes will not usually be presented upright to the scanner. Default = Upright. Default = Upright. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 44: Chapter 4
Step 1. Scan the Add Prefix or Add Suffix symbol (page 36). Step 2. Determine the 2 digit Hex value from the Symbology Chart (included in the Symbology Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 45: To Clear One Or All Prefixes Or Suffixes
Step 3. Scan the 2 digit hex value from the Programming Chart inside the back cover of this manual or scan 9, 9 for all symbologies. Your change is automatically saved. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 46: To Add A Carriage Return Suffix To All Symbologies
Scan the following bar code if you wish to add a carriage return suffix to all symbologies at once. This action first clears all current suffixes, then programs a carriage return suffix for all symbologies. Prefix Selections Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 47: Suffix Selections
Some terminals drop information (characters) if data comes through too quickly. Intercharacter, interfunction, and intermessage delays slow the transmission of data, increasing data integrity. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 48: Intercharacter Delay
To remove this delay, scan the Delay Length bar code, and set the number of delays to 0. Scan the Save bar code using the Programming Chart inside the back cover of this manual. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 49: Interfunction Delay
To remove this delay, scan the Intermessage Delay bar code, then set the number of delays to 0. Scan the Save bar code using the Programming Chart inside the back cover of this manual. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 50: Chapter 5
Determine if this will be your primary data format, or one of 3 alternate formats. This allows you to save a total of 4 different data formats. To program your primary format, Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 51 94 alphanumeric characters may be entered for each symbology data format. Step 7. Scan Save to save your data format, or Discard to exit without saving your changes. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 52: Other Programming Selections
This clears all data formats. Save to exit and save your data format changes. Discard to exit without saving any data format changes. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 53: Terminal Id Table
ASCII code, and xx stands for the insert character’s hex value for its ASCII code. Refer to the ASCII Conversion Chart (Code Page 1252), beginning on page 115 for decimal, hex and character codes. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 54: Move Commands
ASCII code. Refer to the ASCII Conversion Chart (Code Page 1252), beginning on page 115 for decimal, hex and character codes. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 55: Miscellaneous Commands
(characters to be replaced plus replacement characters); xx defines characters to be replaced and xx defines replacement characters, continuing through zz and zz Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 56: Data Formatter
Any data that does not match your data format requirements generates an error tone and the data in that bar code is not transmitted. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 57: Primary/Alternate Data Formats
0. Your other three formats are saved under 1, 2, and 3. To set your device to use one of these formats, scan one of the bar codes below. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 58: Chapter 6
‧ GS1 DataBar Limited ‧ UPC-A/EAN-13 with Extended Coupon Code ‧ GS1 DataBar Omnidirectional ‧ UPC-E0 ‧ GS1 Emulation ‧ UPC-E1 ‧ GS1-128 Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 59: All Symbologies
Save bar codes on the Programming Chart inside the back cover of this manual. The minimum and maximum lengths and the defaults are included with the respective symbologies. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 60: Codabar
When Check Character is set to Validate and Transmit, the scanner will only read Codabar bar codes printed with a check character, and will transmit this character at the end of the scanned data. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 61: Codabar Concatenation
Select Require to prevent the scanner from decoding a single “D” Codabar symbol without its companion. This sele ction has no effect on Codabar symbols without Stop/Start D characters. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 62: Codabar Message Length
Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 2-60. Minimum Default = 4, Maximum Default = 60. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 63: Code 39
When Check Character is set to Validate, but Don’t Transmit, the unit only reads Code 39 bar codes printed with a check character, but will not transmit the check character with the scanned data. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 64: Code 39 Message Length
(FIFO). Default = Off. Full ASCII If Full ASCII Code 39 decoding is enabled, certain character pairs within the bar code symbol Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 65 NAK $U ACK $F SYN $V & BEL $G ETB $W ‘ CAN $X SUB $Z ESC %A < > DEL %T Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 66: Code 39 Code Page
Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 68: Nec 2 Of 5
When Check Digit is set to Validate, but Don’t Transmit, the unit only reads NEC 2 of 5 bar codes printed with a check digit, but will not transmit the check digit with the scanned data. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 69 Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 70: Code 93
Code 93 bar code that starts with a character other than a space. Default = Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 71: Code 93 Code Page
Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 72: Straight 2 Of 5 Industrial (Three-Bar Start/Stop)
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 73: Straight 2 Of 5 Iata (Two-Bar Start/Stop)
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 74: Matrix 2 Of 5
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 75: Code 128
4) the standard layout for bar codes on a blood product label. Use the bar codes below to turn concatenation on or off. Default =Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 76: Code 128 Message Length
Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 77: Gs1-128
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-80. Minimum Default = 1, Maximum Default = 80. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 78: Upc-A
This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 79 When Required is scanned, the scanner will only read UPC-A bar codes that have addenda. You must then turn on a 2 or 5 digit addenda listed on page 69. Default = Not Required. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 80: Upc-A/Ean-13
No data is output unless both codes are read. Default = Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 81: Coupon Gs1 Databar Output
On selection. If you need to read codes that lead with the 1 number system, use UPC-E1 (page 74). Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 82 When this feature is On, there is a space between the data from the bar code and the data from the addenda. When turned Off, there is no space. Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 83 This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2 Digit and 5 Digit Addenda. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 84 Note: If you want to convert UPC-A bar codes to EAN-13 format, scan the UPCA Off bar code on page 67. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 85 EAN/JAN-13 Addenda Required When Required is scanned, the scanner will only read EAN/JAN-13 bar codes that have addenda. Default = Not Required. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 86: Isbn Translate
UPC-A/EAN-13 with Extended Coupon Code (page 69). ISBN Translate When On is scanned, EAN-13 Bookland symbols are translated into their equivalent ISBN number format. Default = Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 87 This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 88 When this feature is On, there is a space between the data from the bar code and the data from the addenda. When turned Off, there is no space. Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 89: Msi
MSI bar codes printed with the specified type check character(s), and will transmit the character(s) at the end of the scanned data. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 90: Msi Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum Default = 48. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 91: Gs1 Databar Omnidirectional
< Default All GS1 DataBar Omnidirectional Settings > GS1 DataBar Omnidirectional On/Off GS1 DataBar Limited < Default All GS1 DataBar Limited Settings > GS1 DataBar Limited On/Off Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 92: Gs1 Databar Expanded
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 4-74. Minimum Default = 4, Maximum Default = 74. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 93: Codablock A
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-600. Minimum Default = 1, Maximum Default = 600. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 94: Codablock F
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-2048. Minimum Default = 1, Maximum Default = 2048. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 95: Pdf417
Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 1-2750. Minimum Default = 1, Maximum Default = 2750. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 96: Macropdf417
PDF417 bar codes. When this selection is enabled, these multiple bar codes are assembled into a single data string. Default = On. MicroPDF417 < Default All MicroPDF417 Settings > MicroPDF417 On/Off Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 97: Micropdf417 Message Length
Note: If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the GS1 DataBar code. See Coupon GS1 DataBar Output (page 71) for further information. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 98: Gs1 Emulation
GS1-128 AIM ID, ]C1 (see Symbology Chart on page 112). If EAN8 to EAN13 Conversion is scanned, all EAN8 bar codes are converted to EAN13 format. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 99: Tcif Linked Code 39 (Tlc39)
The MicroPDF417 component can only be decoded if TLC39 On is selected. The linear component may be decoded as Code 39 even if TLC39 is off. Default = Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 100: Qr Code
Once the proper number of codes is reached, the data is output in the order specified in the bar codes. Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 101: Qr Code Page
Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 102: Data Matrix
Off mined by information encoded in those bar codes. Once the proper number of codes is reached, the data is output in the order specified in the bar codes. Default = On. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 103: Data Matrix Code Page
Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 104: Aztec Code
Once the proper number of codes is reached, the data is output in the order specified in the bar codes. Default = Off. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 105: Aztec Code Page
Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear properly. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 106: Chinese Sensible (Han Xin) Code
China Post (Hong Kong 2 of 5) <Default All China Post (Hong Kong 2 of 5) Settings> Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 107 Scan the bar codes below to change the message length. Refer to Message Length Description (page 49) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 108: Korea Post
This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data. Default = Don’t Transmit. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 109: Chapter 7
Refer to page 18 enable Control + ASCII mode. Function Code HEX/ASCII Value Full ASCII “CTRL” + Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 110 Country Codes United States Belgium < Scandinavia < France Germany Italy Switzerland < United Kingdom ￠ Denmark Norway Spain Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 111: Supported Interface Keys
APPLE break Delete CR/Enter RETURN Insert Ins Help Escape Home Home Print Prnt Scrn Back Space BACKSPACE Back Tab LSHIFT TAB BACKSPACE Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 112: Chapter 8
Show Software Revision Scan the bar code below to output the current software revision, unit serial number, and other product information. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 113: Show Data Format
Note: This feature should not be used during normal scanner operation. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 114: Chapter 9
30 - 100mm (1.2 - 3.9 in.) 15mil Data Matrix 21 - 162mm (0.8 - 6.4 in.) 20mil QR Code 23 - 200mm (0.9 - 7.9 in.) Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 115: Standard Cable Pinouts
Standard Cable Pinouts Keyboard Wedge Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 117: Chapter 10
When properly seated, the connector is held in the scanner’s handle by a flexible retention tab. The interface cable is designed to be field replaceable. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 118: Replacing An Interface Cable
The bar code is displayed on the host device correctly, but you still have to press a key to enter it (the Enter/Return key or the Tab key, for example). Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 119 If you aren’t sure what programming options have been set in the scanner, or if you want the factory default settings restored, refer to Resetting the Factory Defaults on page 5. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 120: Chapter 11
EVENT, SHALL ANY LIABILITY OF unitech ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 121 These warranties are non-transferable. The duration of the limited warranty for the Unitech MS832 scanner is ninety (90)days. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 122: Chapter A
EAN-13 (including Bookland EAN) d (0x64) EAN-13 with Add-On d (0x64) EAN-13 with Extended Coupon Code d (0x64) EAN-8 D (0x44) Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 123 QR Code and Micro QR Code s (0x73) Straight 2 of 5 IATA 0, 1, 3 f (0x66) Straight 2 of 5 Industrial f (0x66) Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 124 Refer to Data Editing beginning on page 34 and Data Formatting beginning on page 40 for information about using Code ID and AIM ID. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 125: Ascii Conversion Chart (Code
SO (SHIFT OUT) RECORD SEPARATOR (RS)UP ARROW SI (SHIFT IN) UNIT SEPARATOR (US)DOWN ARROW Printable Characters Character Character Character <SPACE> " & Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 128 Spanish Replacement Characters ISO 2022 16 Portuguese Replacement Characters ISO 2022 84 Portuguese Replacement Characters ISO 2022 60 Norwegian Replacement Characters Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 129: Unicode Key Maps
Unicode Key Maps 104 Key U.S. Style Keyboard 105 Key European Style Keyboard Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 134 Note: If you make an error while scanning the letters or digits (before scanning Save), scan Discard, scan the correct letters or digits, and Save again. Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Page 135: Appendix
Greater China Division http://cn.ute.com Unitech Japan http://jp.ute.com Unitech North America http://us.ute.com ; http://can.ute.com Unitech Latin America http://latin.ute.com Unitech Europe http://eu.ute.com Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.

Unitech MS832 User Manual

Chapter 1

Getting Started

Chapter 2

Programming the Interface

Chapter 3

Input/Output Settings

Chapter 4

Data Editing

Chapter 5

Data Formatting

Chapter 6

Symbologies

Chapter 7

Interface Keys

Chapter 8

Utilities

Chapter 9

Product Specifications

Chapter 10

Maintenance

Chapter 11

Customer Support

Chapter a

Reference Charts

Appendix

Worldwide Support

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Unitech MS832

Summary of Contents for Unitech MS832

Table of Contents