Unitech ShuttleC User's Installation And Configuration Manual page 5

Copyright © 2016, Unitech .
This manual is copyrighted, with all rights reserved. Under the copyright laws, this manual may not, in whole
or in part, be copied, photocopied, reproduced, translated or converted to any electronic medium or
machine readable form without prior written consent of Unitech .
Limited Warranty
Under all circumstances this manual should be read attentively, before installing and/or using the product.
In no event shall Unitech be liable for any direct, indirect, special, consequential or incidental damages
arising out of the use or inability to use this documentation or product, even if advised of the possibility of
such damages. In particular, Unitech shall not be liable for any hardware, software, or data that is stored
or used with the product, including the cost of repairing, replacing or recovering the above. Unitech
reserves the right to change parts of the device at any time without preceding or direct announcement to
the client.
Unitech reserves the right to revise this manual, and to make changes in the contents without obligation
to notify any person or entity of the revision or change. A serial number appears on the product. Make sure
that this official registration number has not been removed. It should be used whenever servicing by Unitech
or an authorised Unitech dealer is necessary.
Important
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
EN55022, and with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the user's manual, may cause harmful interference to radio
communications. Operation of the equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense. Any unauthorised
changes or modifications to this equipment could void the user's authority to operate this equipment.
C
The Shuttle is in conformity with the CE standards. Please note that a Unitech CE-marked power supply unit
should be used to conform to these standards.
Radio and television interference
Operation of this equipment in a residential area can cause interference with radio or television reception.
This can be determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
•
If necessary, the user should consult the manufacturer, an authorised Unitech dealer or experienced
radio/television technician for additional suggestions. The booklet "How to Identify and Resolve Radio-TV
Interference Problems", prepared by the Federal Communications Commission, can be of help. It can be
obtained from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004000003454.
P/N 0145-SIG5051 V3.06 Date: 14-10-2016
Re-orientate the receiving antenna
Relocate the devices with respect to the receiver
Move the device away from the receiver
Plug the device into a different outlet in order to have the device and receiver on
different branch circuits
FW V0.9.3