Page 1
4-SHELF BOLTLESS SHELVING UNITS MODEL NO: CSR450 PART NO: SEE TABLE PAGE 2 ASSEMBLY INSTRUCTIONS GC0815...
Page 2
INTRODUCTION Thank you for purchasing this CLARKE Shelving Unit. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
Page 3
INVENTORY Description Quantity Post Shelf (metal) Post Joining Insert Plastic End Cap Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 4
ASSEMBLY ADVICE 1. Assemble on a strong, level surface. Avoid assembly on a domestic carpet. 2. Use a cloth or softwood block to protect the surface finish of the product when using a mallet. Strike the flat surface of each beam to prevent damage to the beam.
Page 5
5. Fit post joining inserts (C) into the posts (A), ensuring that the inserts are fitted with their slots to match those of the corner posts. 6. Add the upper posts to the post inserts (C) before adding the remaining shelves as previously to complete the assembly.
Page 6
GENERAL SAFETY RULES 1. Always maintain equipment in good condition for the best/safest performance. 2. Never exceed the maximum load for these shelving units as stated in the specification. 3. Never use these units if they are damaged. 4. Always load small, stable items on the top shelves, heavier and bulky items should be stored on the lower shelves.
Page 7
ENVIRONMENTAL PROTECTION Do not dispose of old products or damaged parts with general household waste. All tools, accessories and packaging no longer required should be sorted, taken to a recycling centre and disposed of appropriately. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CSR450 Series and is the answer not in the manual?
Questions and answers