Related Manuals for Clarke CS4600BO
Summary of Contents for Clarke CS4600BO
- Page 1 4-SHELF INDUSTRIAL BOLTLESS SHELVING MODEL NO: CS4600BO & CS41000BO PART NO: SEE TABLE PAGE 2 ASSEMBLY INSTRUCTIONS GC0416...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE Shelving Unit. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
- Page 3 INVENTORY Description Quantity Post Long Beam Short Beam Support Beam Shelf Foot (already fitted) Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
- Page 4 ASSEMBLY INSTRUCTIONS 1. Assemble on a strong, level surface. Avoid assembly on a domestic carpet. 2. Use a cloth or softwood block to protect the surface finish of the product when using a mallet. Strike the flat surface of each beam to prevent damage to the beam.
- Page 5 5. Repeat this again to create the other end assembly, making sure that the corresponding beams are at the same height. 6. Join the two end assemblies together with the long beams (B) as in Fig 3. • The beams should be spaced equally with a gap of 500mm between each one and the top beam will be level with the top of...
- Page 6 11. We recommend that the racking be secured to an adjacent wall using typical wall insert plugs and screws (not supplied) aligned with the assembly slots in the posts. GENERAL SAFETY RULES 1. Always maintain equipment in good condition for the best/safest performance.
- Page 7 GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
Need help?
Do you have a question about the CS4600BO and is the answer not in the manual?
Questions and answers