Troubleshooting; Table 4: Troubleshooting - ABonAir AB405 Installation And User Manual

Troubleshooting

A

Table 4: Troubleshooting

Symptom
No Power
No Link
Wireless Link is good,
But there is no video
stream
Confidential – Version 1.0
Copyright © 2018 ABonAir Ltd.
AB405 Installation and User Manual
Solution
Transmitter
• Verify that the battery is charged.
• Check the transmitter using the Receiver
power supply.
1 Confirm that the transmitter is powered on.
2 Confirm that the receiver is powered on.
3 Check that the transmitter's antennas are
assembled correctly.
1 Verify that the camera output video signal is
connected to the Transmitter.
2 Verify that the SDI input LCD indication on
the transmitter is On.
3 Verify that the SDI output LCD indication on
the receiver is On.
4 On the receiver, try to swap the HD-SDI
output with the HDMI output.
5 On the Transmitter, try to swap the HD-SDI
output with the HDMI output.
6 Power cycle the transmitter.
7 Power cycle the receiver.
Troubleshooting
21