Childproof Lock; Ending The Programme Through Canceling; End Of Programme - Beko DPU 7440 User Manual

5.14 Child-proof lock
There is a child-proof lock to prevent any pro-
gramme interruption due to the pressing of
button while the programme is running. The
loading door and all buttons except the "On/
Off" button on the control panel are deacti-
vated when the child-proof lock is active.
In order to activate the childproof lock, press
End Time "-" and Programme "+" buttons
simultaneously for 3 seconds. "CL3-CL2-CL1"
and "on-CL-on" appears on the display and
the function is activated.
To start a new programme after the pro-
gramme is over or to interrupt the pro-
gramme, the child-proof lock should be
deactivated. Press the same buttons again
for 3 sec. to deactivate the child-proof lock.
"CL3-CL2-CL1" and "oFF-CL-oFF" appears on
the display and the function is deactivated.
C
Child-proof lock is deactivated
when the machine is restarted by
pressing the On/Off button.
C
Press the relevant buttons for
3 seconds to activate the child-
proof lock. A long beep will be
heard and the child-proof lock
will be activated. A double beep
will be heard if you press any
button when the child-proof lock
is active. Press the buttons for 3
seconds to deactivate the child-
proof lock. Single beep will be
heard and child-proof lock will be
deactivated.
Dryer / User Manual
5.15 Ending the programme
through canceling
In order to cancel the selected program;
press "Start/Pause/Cancel" button for about
3 seconds.
A
As the inside of the machine will
be excessively hot when you
cancel the programme while the
machine is running, activate the
ventilation programme to cool it
down.

5.16 End of programme

"End" appears on the display and "Filter
cleaning" and "Water tank" warning lights
turn on when the programme is over. The
door can be opened and the machine be-
comes ready for a second cycle.
Press "On/Off" button for 1 sec (long) to turn
off the dryer.
C
Final step of the drying cycle
(cooling step) is performed with-
out heat application in order to
keep the items at a temperature
that would not harm them.
C
A 2-hour anti creasing
programme to prevent laundry
from creasing will be activated if
you do not take the laundry out
after the programme has come to
an end.
C
If you will not take the laundry
out immediately, do not stop the
dryer before the drying process is
complete.
C
Clean the filter after each drying
(please see, Lint filter cleaning)
C
Drain the water tank after each
drying (please see, Water tank)
EN / 49