Warning Indicators - Beko DPU 7440 User Manual

5.7 Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end or each time
you press the buttons. If you want to disable
the audio warning, press the Programme "-"
and End Time "+" buttons simultaneously for
3 seconds. "off-bzr-off" appears on the dis-
play. Machine does not give an audio warn-
ing at the end of the programme or when a
button is pressed. You can enable the audio
warning by pressing the same buttons simul-
taneously again for 3 seconds. If you do so,
"on-bzr-on" appears on the display and audio
warning is enabled.
C
You can select this function either
before or after the programme
starts.

5.8 Warning indicators

C
Warning indicators may differ
according to the model of your
machine.
Lint filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
Dryer / User Manual
Water tank
A warning symbol will turn on at the end of
the programme or when the tank is full with
water. The machine stops operating when
this warning symbol lights up while a pro-
gramme is running. To restart the machine,
please drain the water in the water tank.
Press "Start/Pause/Cancel" button to start
the program after you have emptied the
water tank. The warning symbol goes off and
the program resumes operating.
5.9 Specifying the end time
(time delay)
With the "Time delay" function you can delay
the ending time of the programme up to 24
hours.
1. Open the loading door and put the
laundry in.
2. Once the programme is selected, set the
end time with end time ''+'' , ''-'' buttons.
End time symbol flashes.
Press "Start/Pause" button to start the time
delay function. Delay time appears on the
display; meanwhile, the End Time symbol and
Start/Pause symbol illuminates. The time on
the display is the total of normal drying time
and delay time.
EN / 47