Table of Contents
Advertisement
Available languages
Available languages
the programme.
C
Any laundry added after the drying process
has started may cause the dried clothes in
the machine intermingle with wet clothes
and the result will be wet laundry after the
drying process is over.
C
Laundry may be added or taken out as
much as desired during a drying process,
but this process will extend the programme
duration and increase energy consumption
since the drying will be interrupted
continuously. Therefore, it is recommended
to add laundry before the drying programme
has started.
Child-proof lock
There is a child-proof lock to prevent any
programme interruption due to the pressing of
button while the programme is running. The
loading door and all buttons except the "On/
Off" button on the control panel are deactivated
when the child-proof lock is active.
Press the "Start/Pause/Cancel" and "Cancel
audio warning" buttons simultaneously for 3
seconds to activate the child-press lock.
To start a new programme after the programme
is over or to interrupt the programme, the child-
proof lock should be deactivated. Press the
same buttons for 3 sec. again to deactivate the
child-proof lock.
C
Child-proof lock is deactivated when the
machine is restarted by pressing the On/Off
button.
C
Press the relevant buttons for 3 seconds to
activate the child-proof lock. A long beep
will be heard and the child-proof lock will be
activated. A double beep will be heard if you
press any button or turn the programme
selection knob while the child-proof lock is
active. Press the buttons for 3 seconds to
deactivate the child-proof lock. Single beep
will be heard and child-proof lock will be
deactivated.
A
A double beep will be heard if you turn
the programme selection knob when the
machine is running and the child-proof
lock is active. If you deactivate the child-
proof lock without returning the program
selection knob to its previous position, the
programme will be terminated since the
position of the programme selection knob
is changed. The drying light turns on and
the machine remains on hold until a new
programme is selected and the "Start/
Pause/Cancel" button is pressed.
Ending the programme through
canceling
To cancel any selected programme:
Press "Start/Pause/Cancel" button for about
3 seconds. The "Filter cleaning", "Water tank"
and "End/ Anti-creasing" warning lights will
turn on at the end of this period for reminding
purposes.
A
As the inside of the dryer will be excessively
hot when you cancel the programme while
the dryer is running, activate the ventilation
programme to cool it down.
End of programme
The "End/Anti-creasing", "Filter cleaning" and
"Water tank" warning lights on the programme
follow up indicator will turn on when the
programme comes to an end. The door can be
opened and the machine becomes ready for a
second cycle.
Press "On/Off" button to turn off the dryer.
C
Final step of the drying cycle (cooling step)
is performed without heat application in
order to keep the items at a temperature
that would not harm them.
C
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry out
after the programme has come to an end.
C
If you will not take the laundry out
immediately, do not stop the dryer before
the drying process is complete.
C
Clean the filter after each drying (please see,
Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
48 EN
Advertisement
Table of Contents
