Table of Contents
Advertisement
O
perating the product
C
Laundry may be added or taken out as
much as desired during a drying process,
but this process will extend the programme
duration and increase energy consumption
since the drying will be interrupted
continuously. Therefore, it is recommended
to add laundry before the drying programme
has started.
5.12 Child-proof lock
There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all buttons
except the "On/Off" button on the control panel are
deactivated when the child-proof lock is active.
Press the "Start/Pause/Cancel" and "Cancel audio
warning" buttons simultaneously for 3 seconds to
activate the child-press lock.
To start a new programme after the programme is over
or to interrupt the programme, the child-proof lock
should be deactivated. Press the same buttons for 3
sec. again to deactivate the child-proof lock.
C
Child-proof lock is deactivated when the
machine is restarted by pressing the On/
Off button.
C
Press the relevant buttons for 3 seconds
to activate the child-proof lock. A long
beep will be heard and the child-proof lock
will be activated. A double beep will be
heard if you press any button or turn the
programme selection knob while the child-
proof lock is active. Press the buttons for 3
seconds to deactivate the child-proof lock.
Single beep will be heard and child-proof
lock will be deactivated.
Dryer / User Manual
A
A double beep will be heard if you turn
the programme selection knob when the
machine is running and the child-proof
lock is active. If you deactivate the child-
proof lock without returning the program
selection knob to its previous position, the
programme will be terminated since the
position of the programme selection knob
is changed. The drying light turns on and
the machine remains on hold until a new
programme is selected and the "Start/
Pause/Cancel" button is pressed.
5.13 Finishing by canceling the
programme
To cancel any selected programme:
Press "Start/Pause/Cancel" button for about 3 seconds.
The "Filter cleaning", "Water tank" and "End/ Anti-
creasing" warning lights will turn on at the end of this
period for reminding purposes.
A
As the inside of the dryer will be
excessively hot when you cancel the
programme while the dryer is running,
activate the ventilation programme to cool
it down.
5.14 End of programme
The "End/Anti-creasing", "Filter cleaning" and "Water
tank" warning lights on the programme follow up
indicator will turn on when the programme comes to an
end. The door can be opened and the machine becomes
ready for a second cycle.
Press "On/Off" button to turn off the dryer.
C
Final step of the drying cycle (cooling step)
is performed without heat application in
order to keep the items at a temperature that
would not harm them.
C
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if
you do not take the laundry out after the
programme has come to an end.
C
If you will not take the laundry out
immediately, do not stop the dryer before the
drying process is complete.
C
Clean the filter after each drying (please see,
Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
19
Advertisement
Table of Contents
