Latest Revision - B.Well PRO-110 Instructions For Use Manual

Instruction for Use
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
a: Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) tel-
ephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment
due to fixed RF transmitters, an electromagnetic site survey should be considered. If the
measured field strength in the location in which the PRO-110/PRO-115 is used exceeds the ap-
plicable RF compliance level above, the PRO-110/PRO-115 should be observed to verify normal
ns operation. If abnormal performance is observed, additional measures may be necessary, such
as re-orienting or relocating the PRO-110/PRO-115.
b: Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
ed
d in
Recommended separation distances between portable and mobile RF
communications equipment and the PRO-110/PRO-115.
ce
The PRO-110/PRO-115 is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the PRO-110/PRO-
115 can help prevent electromagnetic interference by maintaining a minimum distance
s
between portable and mobile RF communications equipment (transmitters) and the
PRO-110/PRO-115 as recommended below, according to the maximum output power of
the communications equipment.
d
Rated maximum
output power of
the
transmitter
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
er
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
rs,
affected by absorption and reflection from structures, objects and people.
e
nce

16. LATEST REVISION: 2016-02-25

Manufacturer:
B.Well Swiss AG, Bahnhofstrasse 24, CH-9443, Widnau, Switzerland
www.bwell-swiss.ch
M_PRO-110_PRO-115_EN_RO_BG_2916.indd 21
Separation distance according to frequency of transmitter m
150kHz – 80MHz
W
d = 1.2 √P
0,01 0,12
0,1 0,37
1 1,2
10 3,8
100 12
PRO-110 / PRO-115
80MHz – 800MHz 800MHz – 2,5GHz
d = 1.2 √P
0,12
0,38
1,2
3,8
12
d = 2.3 √P
0,23
0,73
2,3
7,3
23
21
21.07.2016 11:39:03