Advertisement
Removing USB / SD Memory card:
To remove the USB / SD memory card, turn off the power or switch the function mode to tuner first. For USB port –
un-plug it by pulling out the USB socket directly. For SD memory card removal – press the memory card inward & then
release, the SD card will pop out.
Phono Vinyl Record Player:
Noted:
Remove the stylus protector prior before attempting to play any vinyl record.
-
Be sure that the tone arm is detached from the tone arm rest before operating and
-
re-secured again afterwards, after playing the record.
1.
Select " Phono " function from function selector (8)
2.
Set the speed selector to the proper position depending on the record to be played.
3.
Place the record on the platter (use the spindle adaptor if required).
4.
Lift the tone arm from the rest and slowly move it to the record side. The platter will start to
rotate.
5.
Place the tone arm to the desired position of the record.
6.
Adjust the volume to the desired level.
7.
At the end of record, the platter will automatically stop rotating. Lift the tone arm from the
record and return it to the rest.
8.
To stop manually, lift the tone arm from the record and return it to the rest.
Aux-in connection:
Connect another audio device, e.g. (portable) CD player, MP3 player, to this system via 3.5mm audio connection
cable. Connect one end of this cord to the 3.5mm dia. headphone jack on the external device and the other end to the
Aux-in jack (31) on the back of the turntable unit. Set the Off/Function selector (8) to 'Aux/Bluetooth/Phono' position
and keep the Phono/Bluetooth button (20) to (Phono). When connected, it is possible to play back the music already
on the connected device through the turntable's speakers.
Bluetooth Connecting and Playback:
1.
Set the Off/Function selector (8) to 'Aux/Bluetooth/Phono' position and set the Phono/Bluetooth button (20) to
(Bluetooth).
2.
The Bluetooth LED indicator (21) will flash, meaning the Bluetooth is pairing / searching mode.
3.
Switch on the Bluetooth feature of your Bluetooth device and select "Pyle Turntable " from the Bluetooth network
selection list.
4.
Once the connection pairs successfully, the Bluetooth LED (21) will remain fully lit.
5.
Start to playback your Bluetooth device and enjoy the music as the turntable acts as a Bluetooth Receiver and
plays audio through the system's speakers.
Notes :
As 'Aux/Phono/Bluetooth' function of this product designed in the same channel as the Aux input jack, be sure
you do not have the Aux input connected to a device prior to attempting to play the Phono or Bluetooth functions.
As the Aux input will take priority over the latter and play the connected media firstly.
To Disconnect Bluetooth:
Press and hold the Play button (4), on the main unit to disconnect the existing Bluetooth connection. Repeat step 3
above again to connect to another Bluetooth device.
Line out connection
You can connect the system to your external speaker system by connecting the line out socket (27) to the auxiliary
input socket with a RCA cable (not included).
Pyle Vintage
-
Classic Style Turntable Systems
PyleUSA.com
Advertisement
