Advertisement
Hints for best reception:-
-
AM : the receiver has a built-in am bar antenna. If AM reception is weak, slightly rotate or re-position the unit, it will
usually improve the AM reception.
-
FM : the receiver has a built-in FM wire antenna hanging at the rear cabinet. This wire should be totally unraveled
and extended for best reception.
Playback of MP3 songs via USB storage media or SD memory card
Connecting
The system is able to decode and playback all MP3 files which are stored in the memory media via USB port or
SD/MMC memory card.
1.
Set Function selector (8) at USB/SD mode and then press source button
(6) to select " USB or SD card" mode.
2.
Plug-in the USB drive with the face up & make sure it goes in completely
or insert the SD memory card in the direction of the arrow as shown in the
label on the underside of the memory card slot cover.
Connecting the USB upside down or backwards could damage the
audio system or the storage media (USB thumb drive / SD/MMC
card). Check to be sure the direction is correct before connection.
3.
The system will start reading the storage media automatically after
connecting and will start to playback automatically.
Remark: USB port does not support connection with USB extension
cable and is not designed for communication with your computer
directly.
Play / Pause / Stop mode
1.
Press " Play/Pause/Stop " button (4) once to pause then playback, the playing time will freeze & the LCD display
will flash (13). Press again to resume normal playback.
Skip/search mode (skip/search up
1.
During play or pause mode, if you press "Skip up" button (15), It will go to next track and display the track no.
and change to play mode.
2.
During play or pause mode, if you press "Skip down" button (5), It will go to previous track and change to playback
mode.
3.
If you press and hold the " Skip up/down button " (15/5) during MP3 playback, the playing track will go fast forward
or backward until the button is released.
Note : The system will mute during search up/down mode
+10/-10 tracks (by remote control)
1.
Press " +10 button (16) or -10 button (on remote control) to skip to your favorite track for more convenience.
Note:
-
The system can detect and read the file under MP3 format only though the USB port or SD card slot.
-
If you connect the system to MP3 player via the USB socket,
some
MP3 players
ID3 (file/artist/album) function (by remote control)
1.
Press the " Info " button during playback of MP3 file, the song file/artist/album will be displayed. Press the " Info "
button again to disable the function.
Song file name search function (by remote control)
You can search the track by the file name during stop mode:-
1.
Press the " Find " button once, then press the "Skip up
file under alphabet order on the LCD display, then press the " Play/Pause/Stop " button (4) to start the playback of
the selected track.
Note:-
- In that case of no name had been assigned for the track, "NO FILE " will be displayed" on the LCD display (13).
- The LCD display supports English language only.
Pyle Vintage
-
Classic Style Turntable Systems
/ skip/search down
may not
be able to play
via the
)
due to variances in MP3 encoding format,
USB socket. This is not a malfunction of the system.
" (15) (or Skip down
) button (5), you can search a
PyleUSA.com
Advertisement
