Download Print this page

Pyle Classic Vintage Retro Style Turntable Manual page 2

Advertisement

Layout & Controls:
1) Dust cover
2) Dial pointer
3) Left speaker
4) Play/Pause/Stop
5) Skip down
button
6) Source button
7) Record
button
8) Power off / Functions selector
9) Volume knob
10) 3.5 mm headphone jack
11) SD/mmc card slot
12) USB socket
13) LCD display
14) Right speaker
15) Skip up
button
16) +10 button
17) Repeat/Intro/Random mode button
18) Radio band selector
19) Tuning knob
20) Phono/Bluetooth button
21) Bluetooth LED indicator
22) FM stereo LED indicator
23) Remote sensor
24) Spindle adaptor
25) Turntable speed selector
26) Pick-up holder
27) Line out socket
28) FM wire antenna
29) Auto stop on/off switch
30) AC power cord
31) Aux in jack
Caution:
Usage of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by
anyone except qualified service personnel.
Precautions for use - Installation
Unpack all parts and remove protective shipping materials.
Do not connect the unit to power before checking the mains voltage and before all other connections have been
made.
Do not cover any vents and make sure that there is space around the unit for ventilation.
Connection
1.
Connect the power cord (30) to AC outlet
2.
Switch the Function selector (8) to " Phono or USB/SD " function. If the backlight at LCD display lights up, that
means the power supply is normal and your system is operable.
Listening to radio - Tuning
1. Turn Function selector (8) to select " Tuner " mode.
2. Select the desired band by Radio band selector (18) (AM or FM or FM-stereo).
3. Tune to the required station by turning the Tuning knob (19).
4. Adjust Volume knob (9) to the desire volume level.
FM & FM-stereo reception
Set the Radio band selector (18) at " FM " position. Programs are received in mono mode. In particular when
stereo signal are weak. It is preferable to receive the program in mono for weaker signal reception stations.
Set the radio band selector (18) at "FM-ST" position for receiving stereo programs. The FM-stereo LED indicator
(22) will light up to show FM stereo program is receiving.
Pyle Vintage
-
Classic Style Turntable Systems
button
PyleUSA.com

Advertisement

loading

This manual is also suitable for:

Ptr8ubtbk