Installing The Add-On Module; Multiple Add-On's Installation; Removing The Add-On Module - Siemens DMS8000 MP4 Series Installation And Configuration Manual

Installation
4
Software installation
4.1.2
4.1.2.1
4.1.3
10
Building Technologies
Fire Safety & Security Products

Installing the Add-on module

The following are the installation procedures for the add-on module.
1. Start the Add-on Manager.
- From the Windows Start menu, select the following:
Start > DMS8000 > Tools > Add-on Manager
 The Add-on Manager window appears.
2. In the list of MM8000 Add-Ons/Name, select the name of the module you wish to
install
-- OR – (if the name of the add-on is not in the list on the screen):
click Browse, locate the installation files of the add-on module, and select the text
file (Extension Product Name.txt) in the root folder.
3. If your installation includes a customized
the check box Use default MM8000 User account and specify the customized
username and password.
Note: For information about the MM8000 Internal Account, refer to
internal user account
4. Click Install (or Update if a previous version was detected).

Multiple add-on's installation

In general, it is possible to install multiple add-on packages and benefit of their
combined functionalities. However, specific incompatibilities might exist. Please check
about possible problems in the documentation of all add-on modules that must be
installed.

Removing the Add-on module

Add-on module cannot be uninstalled.
MM8000 internal account
section of the MM8000 ICC, doc.no. A6V10062413_a_en.
, then deselect
MM8000
A6V10067796_a_en
30.06.2013