Step 13: Powering On Micro Gc Fusion - Inficon Micro GC Fusion Quick Start Manual
Hide thumbs
Also See for Micro GC Fusion:
- Rack mount instruction sheet (4 pages) ,
- Installation sheet (19 pages) ,
- Installation manual (24 pages)
Table of Contents
Advertisement
Micro GC Fusion - Quick Start Guide
Step
Description
13
2-Module Micro GC Fusion
Press the ON/Standby button to power on Micro GC Fusion. The front panel will display the
instrument hostname and IP address in the upper right hand corner. The default hostname set
in the factory is <instrument serial number>.local, for example 70069207.local.
4-Module Micro GC Fusion
Press the on/off switch at the back panel to apply power to the 4-Module Micro GC Fusion. Then
press the ON/Standby button to power on 4-module Micro GC Fusion. The front panel will
display the instrument hostname and IP address in the upper right hand corner. The default
hostname set in the factory is <instrument serial number>.local, for example 70069207.local.
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Micro GC Fusion and is the answer not in the manual?