Locating A Track On A Disc - JVC KD-SH9101 Instructions Manual

Locating a track on a disc

To go to a particular track directly
(ONLY for CD and CD Text discs)
1 2 3
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
To go to a track quickly
1
Press MODE (M) while playing a
disc.
"Mode" appears on the display, and
the number buttons and 5 (up)/ ∞
(down) buttons start flashing.
While playing an audio CD or a CD Text disc:
Current track number
While playing an MP3 or a WMA disc:
Current folder number
4 5 6
MODE
M
See page 40 for this function.
Current track number
Press 5 (up) or ∞ (down), while
2
"Mode" is still on the display.
First time you press 5 (up) or ∞
(down), the track skips to the
nearest higher or lower track
with a track number of multiple ten (ex. 10th,
20th, 30th).
Then, each time you press the button, you
can skip 10 tracks (see "How to go to the
desired track quickly" that follows).
• After the last track, the first track will be
selected, and vice versa.
• While playing an MP3 or a WMA disc, this
operation is possible only within a folder.
How to go to the desired track quickly
• Ex. 1: To select track number 32 while
playing track number 6
MODE
M
(Three times)
\ 10 \ 20 \ 30
Track 6
• Ex. 2 :To select track number 8 while
playing track number 36
MODE
M
(Three times)
\ 30 \ 20 \ 10
Track 36
(Twice)
\ 31 \ 32
(Twice)
\ 9 \ 8
25