JVC KD-SH9101 Instructions Manual page 19

2
Select one of the twenty-nine PTY
codes. (See page 21.)
ATT
3
Press and hold the number button
for more than 2 seconds to store the
PTY code selected into the preset
number you want.
1 2
Selected preset number flashes for a while.
4
Press and hold T/P for more than 2
seconds to exit from this mode.
T/P
To search your favorite programme type
1
Press and hold T/P for more than 2
seconds while listening to an FM
station.
T/P
The last selected PTY code appears.
Selected code name
appears on the display.
3 4 5
2
To select one of your favorite
programme type
1 2
or
To select any one of the twenty-nine
PTY codes
ATT
6
Ex.: When "Rock M" is selected
How to use the 5 (up) or ∞ (down) button
By pressing 5 (up) or ∞ (down) repeatedly,
you can show the list of your preset PTY codes
and all twenty-nine PTY codes (six PTY codes
at a time). First, the list of your stored PTY
codes appears, then all twenty-nine PTY codes
(six PTY codes at a time) appears in sequence.
Press the number button to select your desired
PTY code on the list currently shown on the
display.
3
Start PTY search for your favorite
programme.
• If there is a station broadcasting a programme
of the same PTY code as you selected, that
station is tuned in.
• If there is no station broadcasting a
programme of the same PTY code as you
selected, the station will not change.
Note:
In some areas, the PTY search will not work correctly.
3 4 5 6
19