Stihl GS 461 Instruction Manual page 32

English
Definitions
1 Screw Plug
For removing filter cover.
2 Spark Plug Boot
Connects the spark plug with the
ignition lead.
3 Carburetor Adjusting Screws
For tuning the carburetor.
4 Water Attachment
For connection of water supply.
5 Chain Sprocket Cover
Covers the sprocket.
6 Chain Sprocket
The toothed wheel that drives the
diamond abrasive chain.
7 Chain Tensioner
Permits precise adjustment of chain
tension.
8 Guide Bar
Supports and guides the diamond
abrasive chain.
9 Diamond Abrasive Chain
A loop consisting of diamond
segments, tie straps and drive links.
10 Muffler (with Spark Arresting
Screen)
Muffler reduces engine exhaust
noise and diverts exhaust gases
away from operator.
Spark arresting screen is designed
to reduce the risk of sparks.
11 Front Hand Guard
Helps prevent left hand from
touching the chain if it slips off the
handlebar.
30
12 Front Handle (Handlebar)
Handlebar for the left hand at the
front of the machine.
13 Decompression Valve –
(Automatically Closing)
Temporarily releases compression
pressure to make starting easier –
when activated.
14 Starter Grip
The grip of the pull starter, for
starting the engine.
15 Fuel Filler Cap
For closing the fuel tank.
16 Master Control Lever
Lever for choke control, starting
throttle, run and stop switch
position.
17 Throttle Trigger
Controls the speed of the engine.
18 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
19 Rear Handle
The support handle for the right
hand.
20 Rear Hand Guard
Gives added protection to
operator's right hand.
Guide Bar Nose
The exposed end of the guide bar.
(not illustrated)
Clutch
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
Anti-Vibration System
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
transmission of vibrations created
by the engine and cutting
attachment to the operator's hands.
(not illustrated)
GS 461