Stihl GS 461 Instruction Manual page 12

English
Cutting round and hollow bodies
Secure pipes, round bodies, etc.
N
against rolling away
Mark a cutting line - when
N
determining the cutting line, avoid
reinforcement, especially in the
direction of the severing cut
Make the plunge cut very carefully
N
Feed with full cutting depth along
N
the cutting line – for small
corrections of direction, do not tilt
the diamond abrasive chain, but
always position it anew instead – if
necessary, use wedges and if
necessary, leave small ridges that
hold the part that is to be separated
in position. Break these ridges later
10
Shaping pipe
Secure pipes, round bodies, etc.
N
against rolling away
Mark a cutting line - when
N
determining the cutting line, avoid
reinforcement, especially in the
direction of the severing cut
DANGER
Manual cutting along this line requires
particular caution and precision.
Cut into pipes, round bodies, etc. in
N
the area at the ends of the cutting
line, so that the material does not
break away
Make the plunge cut very carefully
N
at the apex and cut outward on both
sides - feed with full cutting depth
along the cutting line – for small
corrections of direction, do not tilt
the diamond abrasive chain, but
always position it anew instead – if
necessary, use wedges and if
necessary, leave small ridges that
hold the part that is to be separated
in position. Break these ridges later
GS 461