Darfon MIG240UL00 User Manual

Darfon MIG240UL00 User Manual

Micro inverter

Advertisement

Quick Links

MIG240UL00 – Micro Inverter
- 0 -
USER MANUAL
1

INTRODUCTION

1.1 General
Thank you for choosing DARFON's MIG240UL00 Micro Inverters
as your power conversion device for your solar power system.
DARFON's MIG240UL00 micro inverter is a compact unit, which is
installed at the back of each solar module to convert DC power
generated by solar module to AC power for powering your house
appliances and connecting to the electricity grid without the need
for a string or central inverter. The AC output from MIG240UL00
micro inverter is synchronized and in-phase with the electricity grid.
DARFON's micro inverter solution has a number of distinct
advantages:
Optimal energy harvest – it maximizes the power harvested from each
solar module and therefore the entire PV array. This is accomplished by
performing Maximum Power Point Tracking (MPPT), an electronic
technique for maximizing the power harvested from each module under
varying environmental conditions, and performance monitoring for each
individual solar module. Performing MPPT on each solar module ensures
maximum harvest of energy even under partially shaded conditions.
Degradation in the performance of any one module, due to module
mismatch, shadows from trees or chimneys, or obstructions from leaves
or debris, does not degrade the performance of other modules and
therefore has minimal impact on the power harvested from the PV array.
This typically results in improved power harvest of upto 20% from the
solar PV system and represents a significant cost/performance
advantage.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIG240UL00 and is the answer not in the manual?

Questions and answers

Summary of Contents for Darfon MIG240UL00

  • Page 1 AC power for powering your house appliances and connecting to the electricity grid without the need for a string or central inverter. The AC output from MIG240UL00 micro inverter is synchronized and in-phase with the electricity grid.
  • Page 2 PV systems, the string or central inverter, which typically requires replacement at least once over the life of the solar modules, adding significant cost. DARFON’s solar micro inverters have been designed for high reliability operations, to operate in real world conditions from -40 degrees C to +65 degrees C.
  • Page 3 Switch off the circuit breakers before installation and wirings. dealer/service partner/ DARFON customer care for the Connect the micro inverter to the utility grid only after receiving information.
  • Page 4 As the Darfon Limited Warranty does not cover “extraordinary and unexpected manifestation of the forces of nature,” such as lightning strikes, therefore it is recommended to install surge protection as part of any solar installation.
  • Page 5 Mechanical Data Operating temperature range -40ºC to +65ºC 2.4 Technical Specification Input Data (DC) Night time power consumption 45mW Recommended input power (STC) 240W Dimensions (WxHxD) 200mm x 130mm x 37mm Maximum input DC voltage Features Maximum Peak power tracking voltage 24 ~ 40V Communication Powerline...
  • Page 6 STEP.2 – Align MIG240UL00 holes with the holes on the rack and STEP.3 – MIG240UL00 has a clip to hold the Grounding electrode tighten the screws properly.
  • Page 7 Note: When the screws are tightened the coating around the holes will come out. It’s very common and it won’t affect the operation efficiency of the device. STEP.4 – Now connect the micro inverter with the trunk cable. Manufactured by: DARFON ELECTRONICS CORP. 167 Shan-ying Road, Gueishan, Taoyuan 333, Taiwan, (R.O.C.)

Table of Contents