Casablanca Fellini Manual page 11

Wiring (continued)
www.CasablancaFanCo.com
1.888.227.2178
Before Before Before Before
After After After After
After removing the switch plate Using orange wire connectors, Insert the wall control into Install the cover plate using a
cover, remove all wiring from connect the two black wires the outlet box and secure the Phillips Head screwdriver to
two screws using a Phillips
the switch. (ungrounded) from the outlet secure the two cover plate screws.
box. Also connect the two green head screwdriver.
or bare wires (grounding) from
the outlet box with the grounding
wire from the wall control.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions: (1) this device may not cause harmful interference,
Push all connections to the back of the switch box. Spread the
wires apart, with the grounded wires on one side of the switch box and (2) this device must accept any interference received, including
interference that may cause undesired operation.
and the ungrounded wires on the other side of the switch box.
11
M8503-01 • 04/23/13 • © Casablanca Fan Company