Appendix A Technical Specifications - Michell Instruments Easidew Portable HP User Manual

Easidew Portable HP User's Manual
Appendix A Technical Specifications
Performance
Measurement Technology
Measurement Ranges
Spot Checks
Online
Accuracy
Run time
Charge time
Flow Rate
Electrical Input/Output
Output
Power Supply
Operating Conditions
Operating Temperature
Storage Temperature
Operating Pressure
Mechanical Specifications
Display
Case
Weight
Enclosure Rating
Case Closed
Sample Connections
Sample Block
Filter Cartridge
Interchangeability
Michell Instruments
Impedance
-40 to +20°Cdp (-40 to +68°Fdp)
-100 to -40°Cdp (-148 to -40°Fdp)
±2°Cdp (±3.6°Fdp)
12 - 16 hours
16 hours for maximum charge
1 to 5 Nl/min (2.1 to 10.5 scfh)
4-20 mA current maximum load
resistance 400 Ω
Rechargeable NiMH battery pack, charger included
-20 to +50°C (-4 to +122°F)
-40 to +75°C (-40 to +167°F)
Up to 30 MPa (300 barg / 4350 psig)
Flush mounted 3.5 digit red LED
Yellow propylene with charger and output connector stored in the
lid
4kg (8.8lbs) total weight
NEMA Type 6
6mm Swagelok stainless steel tube fittings
®
Stainless steel, fully self-contained sample system with fixed orifice
ports for flow control/pressure or atmospheric measurement and
built-in filtration using a standard drop-in cartridge
Removes 99.5% of particles ≥ 0.3 μm supplied with cartridge
installed. Spare cartridges are available (part no: SSF-PF-10PK)
Sensor is fully interchangeable with other Easidew products
APPENDIX A
15