ABSCO SHEDS RG60602N2 Manual page 8

Frame Section Identification Guide
There are several types of frame section, each featuring a different combination of notches and/or
holes. Frame sections are coded with a letter representing the type of frame section, followed by
the length of the frame section in millimeters.
EG: C2960 = Straight cut both ends with overall length of 2960mm
C-TYPE - Straight cut at both ends
J-TYPE - Straight cut at one end: 20mm tab
notch with holes at other end
K-TYPE - 20mm tab notch with holes at both
L-TYPE - Straight cut at one end: 45mm lip
notch at other end.
S-TYPE - Variable notching and/or holes nominated in parts checklist
Absco Industries Assembly Instruction Manual
ABSCO GARAGE
MODEL: RG60602N2
6.00mW x 6.00mD x 3.40mH
ends
M-TYPE - 45mm lip notch at both ends
N-TYPE - Straight cut at one end: 45mm lip
notch/20mm tab notch with holes at other end
P-TYPE - 45mm lip notch/20mm tab notch with
holes at both ends.
R-TYPE - 45mm lip notch/20mm tab notch with
holes at one end: 90mm lip notch at other end.
Model: RG60602N2 22/10/19 8