Table of Contents
Advertisement
Operating Instructions & Parts Manual
Model Number
F-2332A
F-2392A
F-388P
!
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
Manufactured by
MVP (H.K.) Industries Ltd.
Unit 1101 Lippo Sun Plaza,
28 Canton Road, Tsimshatsui,
Kowloon, Hong Kong
Hydraulic
Floor Jack
Capacity
2 Ton
2 Ton
2
1
Ton
/
4
Printed in China
F-2392A-M0 issue 09/07
Advertisement
Table of Contents
Related Manuals for Pro-Lift F-2332A
Summary of Contents for Pro-Lift F-2332A
- Page 1 Hydraulic Floor Jack Operating Instructions & Parts Manual Model Number Capacity F-2332A 2 Ton F-2392A 2 Ton F-388P This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 2: Package Contents
PACKAGE CONTENTS Part Description Quantity Jack Pumping Handle Carrying Handle Figure 1 - Package Contents SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and/or operator of this jack shall have an understanding of the jack and safe operating procedures before attempting to use. - Page 3 WARNING • Study, understand, and follow all instructions provided with and on this device before use. • Do not exceed rated capacity. • Use only on hard, level surface. • This is a lifting device only! • Immediately after lifting, support the vehicle with a pair of appropriately rated jack stands.
- Page 4 PREPARATION Before Use 1. Verify that the product and the application are compatible, if any doubt call Customer Support @ (816) 891-6390. 2. Before using this product, read the owner’s manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use.
-
Page 5: Care And Maintenance
OPERATING INSTRUCTIONS (continued) Lowering 1. Raise load high enough to clear the jack stands; then carefully remove jack stands (always used in pairs). 2. Slowly turn the handle counter-clockwise, but no more than 1/2 full turn. If the load fails to lower: a. -
Page 6: Troubleshooting
TROUBLESHOOTING Symptom Possible Causes Corrective Action Jack will not lift load • Release valve not • Ensure release valve tightly tightly closed. closed. Use the provided handle to engage the release valve. Turn the release valve clockwise until firm resistance is felt. •... -
Page 7: Replacement Parts
When ordering parts, give model number, serial number and description below. Call or write for current pricing: Customer Support, 10939 N. Pomona Ave., Kansas City, MO 64153. Phone (816) 891-6390, Fax (816) 891-6599 Model F-2332A, F-2392A & F-388P Item Description Quantity... -
Page 8: Warranty
WARRANTY 2 YEARS LIMITED WARRANTY For a period of 2 years from the date of purchase, MVP (H.K.) Industries Ltd. will repair or replace, without charge, any of its products which fails due to a defect in material or workmanship. Performance of any obligation under this warranty may be obtained by simply returning the product during the warranty period to your retailer with the original receipt along with an explanation of the defect.