Add A Headset - AT&T DLP73210 Complete User's Manual

Bluetooth
Bluetooth setup
If you have trouble pairing your cell phone, it may not be compatible with
your DLP73210/DLP73410/DLP73440/DLP73540. Check the Bluetooth
compatibility list at
Notes:
The pairing process may take up to one minute. If the pairing process fails, try again.
phone and your DLP73210/DLP73410/DLP73440/DLP73540 to complete the pairing process.

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's manual
to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU/
2. Press or
CID
3. Press or
CID
The screen displays The screen displays Please wait... followed by Search
headset.
If there are already 2 paired devices on the list, the telephone prompts
you to select a device slot. If you select a slot, the telephone displays
Disconnect Cell Phone X? (Cell Phone X represents the device name of
your cell phone) If you press
device will be automatically removed, regardless of whether the pairing of
the new device is successful or not.
If there is another headset already active, the screen will show Disconnect
Headset Y? (Headset Y represents the device name of your paired
headset) If you press
will be automatically removed, regardless of whether the pairing of the
new device is successful or not.
4. Set your headset to discoverable mode (refer to the user's manual of
your headset). The screen displays Adding Headset Y when the base is
connecting to your headset (Headset Y represents the device name of your
Bluetooth headset).
www.telephones.att.com/bluetooth
on the telephone base in idle mode to enter the main menu.
SELECT
to highlight Bluetooth, then press
DIR
to highlight Add headset, then press
DIR
MENU
/SELECT
MENU
/SELECT
22
.
/SELECT.
MENU
/SELECT.
MENU