Table of Contents
Advertisement
Telephone settings
Telephone base settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page 48).
To set the date and time manually:
1. When the telephone base is in idle mode, press MENU/
main menu.
2. Press
or
CID
then press
MENU
3. Press
or
CID
/SELECT, or enter the number using the
MENU
dialing keys.
4. Press
or
CID
/SELECT, or enter the number using the
MENU
dialing keys.
5. Press
or
CID
number using the dialing keys, then press
/SELECT to move on to set the time.
MENU
6. Press
or
CID
/SELECT, or enter the number using the dialing
MENU
keys.
7. Press
or
CID
the number using the dialing keys.
8. Press
or
CID
Press
/SELECT
MENU
returns to the previous menu.
Notes:
plays the message.
to scroll to Set date/time and
DIR
/SELECT.
to select the month, then press
DIR
to select the day, then press
DIR
to select the year, or enter the
DIR
to select the hour, then press
DIR
to select the minute, then press
DIR
to highlight AM or PM, or press 2 for AM or 7 for PM.
DIR
42
to enter the
SELECT
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
/SELECT, or enter
MENU
Time and day not set,
Advertisement
Table of Contents
