Table of Contents
Advertisement
Telephone settings
Telephone base settings
Home area code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID log only displays the seven digits
of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial ten digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they will
have only seven digits.
To set the home area code:
1. Press MENU/
menu.
2. Use
or
CID
/SELECT.
MENU
3. Use
or
CID
press
/SELECT
MENU
Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area
code.
Press
MUTE/
Press and hold
5. Press
/SELECT
MENU
shows Area code will not show in CID
previous menu.
Note: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code
plus telephone number), you need to delete your home area code and dial out locally from the caller ID log. With
the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press
/SELECT
MENU
in idle mode to enter the main
SELECT
to scroll to Settings, then press
DIR
to scroll to Home area code, then
DIR
DELETE to delete a digit.
DELETE to delete all digits.
MUTE/
48
Key tone
>Home area code
HOME AREA CODE
___
Advertisement
Table of Contents
