Beko WRE 6532 B0 User Manual page 21

Washing takes longer than the specified in the manual.(*)
• Water pressure is low. >>>
washing quality due to the decreased amount of water. Therefore, the washing time extends.
• Voltage might be low. >>>
voltage is low.
• Input temperature of water might be low. >>>
seasons. Also, washing time can be lengthened to avoid poor washing results.
• Number of rinses and/or amount of rinse water might have increased. >>>
amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.
• Excessive foam might have occurred and automatic foam absorption system might have been
activated due to too much detergent usage. >>>
Programme time does not countdown. (On models with display) (*)
• Timer may stop during water intake. >>>
in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor
washing results due to lack of water. Timer indicator will resume countdown after this.
• Timer may stop during heating step. >>>
the selected temperature.
• Timer may stop during spinning step. >>>
activated due to the unbalanced distribution of the laundry in the drum.
Programme time does not countdown. (*)
• There might be an imbalance of laundry in the machine. >>>
system might be activated due to the unbalanced distribution of the laundry in the drum.
Machine does not switch to spinning step. (*)
• There might be an imbalance of laundry in the machine. >>>
system might be activated due to the unbalanced distribution of the laundry in the drum.
• The machine will not spin if water is not drained completely. >>>
hose.
• Excessive foam might have occurred and automatic foam absorption system might have been
activated due to too much detergent usage. >>>
Washing performance is poor: Laundry turns gray. (**)
• Insufficient amount of detergent was used over a long period of time. >>>
amount of detergent appropriate for water hardness and the laundry.
• Washing was made at low temperatures for a long time over a long period of time. >>>
proper temperature for the laundry to be washed.
• Insufficient amount of detergent is used with hard waters. >>>
with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult
to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water
hardness and the laundry.
• Too much detergent is used. >>>
hardness and the laundry.
Washing performance is poor: Stains persist or the laundry is not whitened. (**)
• Insufficient amount of detergent is used. >>>
the laundry.
• Excessive laundry was loaded in. >>>
recommended in the "Programme and consumption table".
• Wrong programme and temperature were selected. >>>
temperature for the laundry to be washed.
• Wrong type of detergent is used. >>>
• Detergent is put in the wrong compartment. >>>
mix the bleaching agent and the detergent with each other.
21 / EN
Machine waits until taking in adequate amount of water to prevent poor
Washing time is prolonged to avoid poor washing results when the supply
Required time to heat up the water extends in cold
Timer indicator will not countdown until the machine takes
Timer indicator will not countdown until the machine reaches
Automatic unbalanced load detection system might be
Use the recommended amount of detergent appropriate for water
Use recommended amount of detergent appropriate for
Do not load the machine in excess. Load with amounts
Use original detergent appropriate for the machine.
Use recommended amount of detergent.
Automatic unbalanced load detection
Automatic unbalanced load detection
Check the filter and the draining
Use recommended amount of detergent.
Using insufficient amount of detergent
Select the proper programme and
Put the detergent in the correct compartment. Do not
Washing Machine / User's Manual
Machine increases the
Use the recommended
Select the