Sport-thieme 120 8405 Operating And Assembly Instructions

Operating/assembly instructions
Sport-Thieme parallel bars
Product code: 120 8405, 120 8418, 120 8421
Operating/assembly instructions Sport-Thieme parallel bars
Thank you very much for choosing a Sport-Thieme product. Please read the
instructions fully before you assemble the equipment so you can enjoy the product

1. Description

All bars models comply with DIN 7901 'parallel bars with inlay mat', including
DIN EN 914 'parallel bars and combined asymmetric bars/parallel bars'. The
regulations described there, with regards to area of use, inspection,
measurements and maximum loads, apply.
The uprights are attached to the welded base frame with cast bells. The cross
girders are closed off with special rubber inserts which are floor-friendly and
protect the sides when moving the apparatus. The generously sized castors,
which can be lowered using a handle, are housed in the cast bells.
Adjust height and horizontal position using a double secured clamping lever.
The respective technical regulations valid at the time of delivery apply to
design, function and use of the apparatus (the edition at the time of delivery is
valid).
and its guaranteed safety:
page 1 of 4
38367 Grasleben / Germany
Telephone: +49 (0)5357 181 81
www.sport-thieme.com
04/2016