Sport-thieme Minitramp 112 Operating & Assembly Instructions

Operating/assembly instructions
Minitramp
Prod. code: 122 8104 - Minitramp 112
122 8205 - Minitramp 125
Operating/assembly instructions for Minitramp
Thank you very much for choosing a Sport-Thieme product. We want to make sure
that you can enjoy this product, so here is some important advice for your safety as
well as for the use and maintenance of the equipment.
Please read these instructions fully before you assemble and

1. Assembly and adjustment

Tools: no tools are required for assembly. A Minitramp can be assembled by
someone who is familiar with the instructions.
• To fold out the legs, place the trampoline vertically so both feet are freely
moveable.
• Pull the legs into the desired position.
• Each of the telescopic support struts is tensioned by a steel spring.
• Pull the struts to lock them in the respective sleeve on frame and feet.
• Adjust the height of the trampoline surface using the star grip on the
foot support.

2. Transport and storage

The folded trampolines can either be carried by hand or transported on a
suitable trolley. The trampolines should be stored in an equipment room with
restricted access. Please ensure that no sharp or pointed objects are leaning
against the trampoline. This could cause damage to the trampoline bed and the
padding. We recommend using the Eurotramp transport trolley for transport and
storage (for max. 8 Minitramps).
Required space for Minitramp 112 (122 8104) and Minitramp 125 (122 8205)
Assembled dimensions:
Dimensions when stored:
Use the equipment.
112x112 cm
112x112x10 cm and
page 1 of 3
and 125x125 cm
125x125x10 cm when
folded
04/2016