Maintenance; Clean The Exterior Of The Unit; Clean The Label Output Slot; Self-Cleaning Print Head - Brother QL-600 User Manual

9

Maintenance

We recommend cleaning your Label Printer on a regular basis to maintain its performance.
Note
Always disconnect the AC Power Cord before cleaning the Label Printer.

Clean the Exterior of the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a cloth slightly damp ened with water on stubborn marks.
Note
Do not use paint thinner, benzene, alcohol, or any other organic solvent.
These may deform or damage the Label Printer case.

Clean the Label Output Slot

If a label causes the Label Printer to jam due to adhesive residue attached to the Label Output Slot,
disconnect the AC Power Cord from the Label Printer and clean the area with a cloth or cotton swab dipped
in isopropyl alcohol or ethanol.
Note
Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.

Self-Cleaning Print Head

The DK Roll (thermal recording paper type) used with the Label Printer is designed to clean the Print Head
automatically. When the DK Roll passes the Print Head during printing and label feeding, the Print Head is
cleaned.
9
9
9
9
9
48