Reset The Label Printer; Reset Device Settings To The Factory Settings Using The Label Printer Buttons; Reset Device Settings Using The Printer Setting Tool - Brother QL-600 User Manual

8

Reset the Label Printer

Reset your printer's device settings if the Label Printer is not operating correctly.
Reset Device Settings to the Factory Settings Using the Label
Printer Buttons
To reset the Label Printer, do the following:
a
Turn off the Label Printer.
b
Press and hold the
orange.
c
Continue holding down the
d
Release the (Power Button). The Status LED flashes orange. Then, the Status LED lights in green.

Reset Device Settings Using the Printer Setting Tool

You can also use the Printer Setting Tool from your computer to reset device settings to the factory settings.
For more information, see Factory Reset on page 20.
(Power Button) and Cut Button for about two seconds. The Status LED lights in
(Power Button), and press the Cut Button six times.
8
8
8
8
47