Troubleshooting; Overview; Driver Installation Problems (For Windows) - Brother QL-600 User Manual

10

Troubleshooting

Overview

This chapter explains how to resolve typical problems you may encounter when using the Label Printer. If you
have any problems with the Label Printer, first make sure you have performed the following tasks correctly:
 Connect the Label Printer to an AC power outlet. For more information, see Connect the AC Power Cord
on page 4.
 Remove all protective packaging from the Label Printer.
 Install and select the correct printer driver. For more information, see Install Printer Driver and Software
on a Computer on page 8.
 Connect the Label Printer to a computer. For more information, see Connect the Label Printer to a
Computer on page 8.
 Close the DK Roll Compartment Cover completely.
 Insert a DK Roll correctly. For more information, see Load the DK Roll on page 5.
If you still have problems, read the troubleshooting tips in this chapter for help. If, after reading this chapter,
you are unable to resolve your problem, visit support.brother.com.

Driver Installation Problems (for Windows)

Problem
The "Device driver software was not
successfully installed." message
appears on the computer.
• I cannot install the printer driver
even if I follow the correct
procedure.
• I cannot see my Label Printer
listed in P-touch Editor even
though I have installed the printer
driver.
Solution
• Although such Windows messages may continue to appear during the
installation, you can still install the driver correctly using the installer.
• Before you run the installer, make sure that the Label Printer is on and that
it is connected to your computer with a USB cable.
• If the printer driver is not successfully installed, go to
printer driver even if I follow the correct procedure.
If you cannot use your printer even though you have installed the printer driver:
1. Download the Printer Driver Uninstaller from support.brother.com.
2. Use the Printer Driver Uninstaller to remove the printer information.
3. Run the installer again and follow the on-screen instructions to proceed with
the installation.
10
10
10
10
I cannot install the
on page 49.
49