1.
Once the mounting plate is installed, now install the indoor unit.
3. Install the indoor unit using the supports
Cover
5. Remove the plastic cover
A.
Insert the support in the slot
Mounting plate
Mounting plate
Pipe support
Brackets
2. Open the brackets to 90°C
4. Remove the plastic cover from the screws.
Notes:
•
Once the indoor unit is installed, proceed to connect the
pipe as indicated in the pipe connection section.
•
To install the electrical installation, place the supports and
support the unit on the support plate.
•
Once the pipe is in place, use the pipe support to keep
them in position, the pipe must be properly seated before
this step.
•
Place the cover once the installation is complete and
screw it
Insert here
Big
pipe
Drain
Small
hose
pipe
Pipe support
B.
Press until the pipe support engages in the base
Slot
Open
Open
Screw cover
Big
pipe
Drain
Small
hose
Hook up
pipe
here
20