3 How to Use the Application Example
3. Now execute a "SetMvProgram" command. To do this, right-click the row of the
"executeSetMvProgram" tag, select "Modify" and left-click "Modify to 1".
4. The "done", "error" and "status" tags allow you to check whether or not the job
has successfully completed.
An erroneous job has occurred only if the "error" tag is set. In this case, a hex
error code is automatically written to the "status" tag. This error code allows
you to diagnose the cause of the error.
MV Basics
Entry ID: 109757269,
V1.0,
04/2018
35