Table of Contents
Advertisement
3 How to Use the Application Example
Executing a SetDisa command
1. Execute a setDisa command. To do this, right-click the row of the
"executeSetDisa" tag, select "Modify" and left-click "Modify to 1".
2. The "done", "error", "status", "stateMv" and "stateDisa" tags allow you to check
whether or not the job has successfully completed.
An erroneous job has occurred only if the "error" tag is set. In this case, a hex
error code is automatically written to the "status" tag. This error code allows
you to diagnose the cause of the error.
MV Basics
Entry ID: 109757269,
V1.0,
04/2018
33
Advertisement
Table of Contents
