Table of Contents
Advertisement
2 Engineering
Parameterizing the MV440
To adjust the MV440 to the environmental conditions, the first step is to make the
exposure and focus settings in the "Adjustment" section.
1. To do this, place an object in the field of view of the MV440 (e.g., a DMC).
2. Use the focus on the lens and exposure settings to get a sharp, evenly
illuminated image.
3. Use the 3 set screws to lock the focus ring on the lens in place.
4. Finally, the result of the evaluation is defined as a string.
Note
The above section provides only a rough explanation of the steps for adjusting
object recognition. For detailed information, refer the MV440 operating
instructions or the web user interface online help.
Optional installation of licenses
When using advanced functions such as object recognition, code quality
verification or OCR, the license required for this function must be transferred to the
MV440. This is done using the Automation License Manager (ALM).
The product DVD supplied with the camera contains the MV plug-in for the ALM.
This plug-in must be installed first. For a detailed description, refer to chapter 7.3 of
the MV440 manual.
https://support.industry.siemens.com/cs/ww/en/view/84553392
To transfer a license, the reader must be in STOP.
Note
Make sure that the Automation License Manager and the MV plug-in have the
same bit version (32- or 64-bit).
MV Basics
Entry ID: 109757269,
V1.0,
04/2018
27
Advertisement
Table of Contents
