Table of Contents
Advertisement
3 How to Use the Application Example
Result: length and result of the result string.
The sections contain the tags – from the "Interface" data block – to be modified and
monitored. These tags are directly linked to the "MV_Control" block.
Using the watch table
This chapter describes the steps for using the sample code.
1. Double-click to open the "ControllingInterface" watch table from the project
tree.
2. In the watch table, click "Monitor all".
MV Basics
Entry ID: 109757269,
V1.0,
04/2018
31
Advertisement
Table of Contents
