Data Collected During Start Up - Danfoss Optyma Plus Application Manuallines

Application Guidelines
Identification
Country
Installation reference (shop name)
City of installation
Installer Company
Unit Code/Type
Serial N° of unit
Installation Date
Commission Date
Installation
Refrigerant
Number of evaporators connected to the variable speed condensing unit
Expected maximum Ambient temperature °C
Expected minimum Ambient temperature °C
Evaporators
Evaporator N°
Type of application (cold room, cabinet, process cooling, etc.)
Distance to the unit [m]
Vertical position of the unit (+ if above or - if below)
Evaporator Cooling capacity [kW]
Evaporating pressure [bar] / temperature [°C]
Superheat at evaporator outlet [K]
Type of expansion valve used : Thermostatic (TEV) - electronic (EEX)
Compressor
Suction gas temperature [°C] or pressure [bar] at compressor inlet
Frequency observed at stabilised condition
Oil level in oilsightglass after start-up (1/4 - 1/2 - 3/4)
Oil topup [L]
Refrigerant charge [kg]
Electrics & controls
Has the installation a stable power supply
Voltage (between L1/L2/L3)
What's the type of grid (IT, TT, TN)
If system-manager used (AK-SM, AK-SC....), type
Kind request to provide after start-up completed copy of this page to your wholesaler of purchase, as part of warranty modalities.
40
FRCC.PC.044.A6.02

Data collected during start up

1 2
U1: U2: U3:
3 4