Table of Contents
Advertisement
Adjusting the refrigerator shelves...
Shelves can be adjusted
to match
the way you
To remove
glass shelves:
use your refrigerator.
If your model has gloss shelves,
1. Tilt up at front.
be careful. They are heavy
2. Lift UD at back.
3. Pull shelf straight out.
To replace:
1. Guide
the rear hooks into the slots in the shelf
supports.
2. Trlt up front of shelf until hooks drop into slot. Lower
front of shelf to level position
Removing
the freezer shelf.. .
,,
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order
Moving the meat pan and cover...
The meat pan can be taken cut and moved
the
same way as the shelves. Remove the meat pan first.
Removlng:
I. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replaclng:
1. Guide
the rear hooks into the slots in
suppocts.
2. Tilt up front of cover until rear hooks drop
Lower front of cover to level position.
3. Replace
meat pan in reverse order.
the shelf
into
Slots.
Removing the crispers
Removlng crlspers:
I. Slide crispers straight out to stop.
2. Liff the front.
3. Slide the rest of the way out.
4. Replace
in reverse order.
Removlng covers:
Covers are held in by two pegs at
notched
tabs in front.
1. Press front out of way.
2. Lift cover front.
3. Lifl back out of pegs.
4. Replace
in reverse order.
and crisper covers
p,"g,;; Tab+& ~-++g-..,
the Cover.
p
the back and two
Snap Back
inln DInen
If necessary, the center leg can be made shorter or
longer to help level the crisper covers. Turn the leg
clockwise
to make it longerTurn the leg counterclock-
wise to shorten it.
6
Advertisement
Table of Contents
