Table of Contents
Advertisement
.
Reversing the door swing.. .
You can change
the hinges on your refrigerator
so
the doors open the other way. Refer to the instruction
sheet included
with your refrigerator.
Removing the base grille...
2. Pull grille outwards as shown,
3. DO not
remove Tech sheet
fastened behind gri tie.
lace:
Support
Tabs
1. Line up grille support tabs with metal clips,
2. Push firmly to snap into place
3.
Close the doors.
Changing the light bulb...
WARNINB: Before removing the light shield for
cleaning or for replacing the bulb
either unplug refrlgemtor or dircori
nect electricity
leadlng
to re-
frlgemtor at the main power supply
Shock and lnjuy can occur lf elec:
trlctty remains connected.
1. Push lightly on the top center of the light shield until
the notched
tab unhooks from the control panel.
2. Pull down on the shield until the tab clears the con-
trol panel.
3. lift the back hooks out of their slots.
4. Replace
with a cl&watt appliance
bulb.
5. Replace
light shield in reverse order.
Pull Down.
I
lr-nwaa
Ice cube trays...
To remove Ice:
4.
$, ;;;Jdya;both
ends.
If cubes ore not used. they may shrink. The moving
cold air Starts a slow evapocotion,
The longer cubes
are stored, the smaller they get,
Advertisement
Table of Contents
