Imperial DABMAN i500 BT Manual page 64

4. IMAGES
4. Volume control, navigation wheel and OK confirmation button
Use the wheel to change the volume or to navigate through the device's menu. Press the
button to confirm an entry.
5. USB connection
Here you can connect a USB data storage device to the device, such as a USB hard drive
or USB stick, to play music files from it.
6. Bluetooth antenna
Connect the supplied Bluetooth aerial here.
E
7. WLAN antenna
Connect the supplied WLAN antenna here so that you can connect the device to your
WLAN home network via WLAN.
8. Power supply input
Use this jack to connect the device to the (included) power supply unit in order to power
the device.
9. Optical digital output
If your digital amplifier has a corresponding optical input, connect the i500's OPTICAL
OUT jack to the optical SPDIF input on your amplifier. You will need a fibre optic cable to
do this.
10. Electrical digital output
If your digital amplifier has a corresponding electrical input, connect the SPDIF jack of the
i500 to the optical SPDIF
input of your amplifier.
11/12. Analog audio output left/right
Use these sockets to connect the radio to a Hi-Fi amplifier or powered speakers to trans-
mit the music received by the radio to a sound system.
13. LAN connection
Here you can connect the device to an existing network with a network cable to use the
internet radio feature. (Alternatively, the device can also be connected via WLAN.)
14. VHF radio antenna
Connect the included VHF telescopic antenna to receive VHF radio stations.
Operating Manual
64
BDA Dabman i 500_BT_Deutsch_01_19.indd 64 18.02.19 13:12