IEI Technology PAC-1700G Quick Installation Manual

ABOUT THE PAC-1700G
The 7-slot, heavy-duty steel PAC-1700G compact wall-mount
industrial chassis is designed to operate reliably in industrial
environments where it will be exposed to dust, wide temperature
variations, and shocks and vibrations, among other things.
SPECIFICATIONS
Form Factor: 7-slot compact chassis
SBC Form Factor: Full-size, slot CPU cards
Construction: Plastic
Slots Number: 7-slot
Cooling: 1 x 8cm fan
Drive Bay:
o 1 x 3.5" FDD
o 1 x 5.25" Optical drive
o 2 x 3.5" HDDs
Dimensions (DxWxH):
o 433mm x 233mm x 253.7mm
Operating Temperature: 0~40°C
Relative Humidity: 5~95%
Vibration:
o 5 to 17Hz, 0.1" double amplitude displacement
o 17 to 640Hz, 1.5G acceleration peak to peak
Shock: 10G acceleration peak to peak
PAC-1700G QIG
PAC-1700G
7-slot Wall-mount Chassis
Version: 1.0
Quick Installation Guide
IEI Technology Corp.
PACKING LIST
When you unpack the chassis, make sure the following items
have been shipped.
1 x Quick Installation Guide
1 x Power cord
2 x Wall-mount plates
1 x Screw set
DETAILS OF INCLUDED SCREWS
The attached screw set includes five screw types. Screws
used for chassis installation are shown below.
1 2
Peripherals/Parts
3.5" FDD
5.25" Optical Drive
3.5" HDD
Power Supply Unit
Wall-mount Plate
Backplane
Table 1: Screws for Peripheral/Parts
3 4 5
Screw Label (refer
to the picture
above)
5
5
1
1
3
3
2
Page 1