How To Operate Your Ceiling Fan - Fanimation LEVON FP7910 Series Manual

How to Operate Your Ceiling Fan

1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
2. Install the fan pull chain coupler. (Figure 2)
3.
Check the operation of the fan by gently pulling on
the fan pull chain coupler. (Figure 3)
Fan Pull Chain Coupler Operating Sequence
st
1 Pull
nd
2 Pull
rd
3 Pull
th
4 Pull
4. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Slide the
reverse switch on the switch cup assembly to the
opposite position and turn fan on again. (Figure 4)
Reverse Switch Information
Season Rotation Direction
Summer Counterclockwise
Winter Clockwise
High
Medium
Low
Off
Switch Position
Left
Right
13
Figure 1
Fan Pull
Chain Coupler
Figure 2
Fan Pull
Chain Coupler
Figure 3
Reverse Switch
Figure 4
Main Fuse Box