Fanimation. 7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty. 8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac- company authorized returns and must be sent freight prepaid to Fanimation.
– Phillips screwdriver, 4˝ Fanimation. Substitution of parts or accessories not • Motor Coupling Cover – Two 5/32˝ threaded rods designated for use with this product by Fanimation could • Blade Holders – Two 5/32˝ lockwashers • Blades (8) result in personal injury or property damage. Contact –...
8 - 9 feet above the floor for optimal airflow. Consult your down into the occupied space.Remember to adjust your Fanimation Retailer for optional mounting accessories. thermostat when using your ceiling fan - additional energy and dollar savings could be realized with this simple step! Turn Off When Not in the Room Ceiling fans cool people, not rooms.
How to Assemble Your Ceiling Fan 1. Remove the Hanger Ball by loosening the setscrew in the Hanger Ball until the ball falls freely down the Downrod. (Figure 1) Remove the Pin from the Downrod, then remove the Hanger Ball. Retain the Pin and Hanger Ball for reinstallation in Step 5.
How to Hang Your Ceiling Fan ▲WARNING Ceiling To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before hanging. NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.
How to Wire Your Ceiling Fan - Pull Chain If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. ▲WARNING Black To avoid possible electrical shock, be sure electricity is Listed Fan Wire Black...
Assembling and Mounting the Fan Blades and Switch Hsg INSTALLATION NOTE Do not connect fan blades until the fan is completely installed. Installing the fan with blades assembled may result in damage to the fan blades. ▲WARNING To reduce the risk of personal injury, do not bend the blade holders when installing, balancing the blades or cleaning the fan.
Assembling and Mounting the Fan Blades and Switch Hsg (Cont’d) 10. Assemble the Housing Switch Cup onto the assembled Adapter with three screws. (Figure 6) 11. Restore Power and your fan is now wired to be turned on and off from the fan pull chain speed control. Figure 6 Operating Instructions - Pull Chain 1.
Parts List Model FP7910OB Downrod/Hanger Ball Assembly Containing: Hanger Ball Assembly Downrod ADR1-6OB Clevis Pin Hairpin Clip n i l n i l AP1115OB AMA7910OB c t i Wiring Harness (part of Switch Cup Housing/Adapter assembly) AP5006 AP880001OB HDWFP7910SS Hardware Bag Containing: ”...
Trouble Shooting ▲WARNING For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan. Trouble Probable Cause Suggested Remedy 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers.
Page 15
™ The Levon 8-aspas Ventilador de techo Peso neto 10.8 kg (23.8 lb) Modelo N.º FP7910OB MANUAL DEL PROPIETARIO LEA Y GUARDE ESTAS INSTRUCCIONES...
Page 16
1. GARANTÍA LIMITADA DE POR VIDA DEL MOTOR: si se produce una falla en alguna de las partes del motor de su ventilador debido a un defecto en los materiales o en la fabricación durante el tiempo de vida del comprador original, Fanimation proporcionará...
Page 17
• Capuchón de fibra (aspa a soporte de aspas) indicados por Fanimation específicamente para el mismo. La – destornillador Phillips de 4˝ • Cubierta de unión del motor sustitución de piezas o accesoriosque Fanimationno designó...
Page 18
óptimo. del reloj. Esto produce una suave corriente ascendente, Consulte en su tienda minorista de Fanimation para que obliga al aire cálido que se acumula cerca del techo a obtener accesorios de montaje opcionales.
Page 19
Cómo ensamblar el ventilador de techo 1. Afloje el tornillo de fijación de la semiesfera para lograr que ésta pueda desplazarse libremente por el barral. Retire el pasador del barral y luego extraiga la semiesfera. Conserve el pasador y la semiesfera Bola para Pasador colgar...
Page 20
Cómo colgar el ventilador de techo ADVERTENCIA Techo Para evitar una posible descarga eléctrica, asegúrese de cortar la alimentación eléctrica de la caja de fusibles principal antes de colgar el ventilador. NOTA: Si no está seguro de si la caja de salida tiene conexión a tierra, pida consejo a un electricista certificado, ya que debe tener conexión a tierra para un funcionamiento seguro.
Page 21
Cómo realizar la instalación eléctrica del ventilador de techo Si siente que no posee la experiencia o los conocimientos eléctricos necesarios, contrate a un electricista autorizado para instalar el ventilador. ▲ ADVERTENCIA Cable del Para evitar posibles descargas eléctricas, asegúrese de Caja de ventilador Negro...
Page 22
Ensamblaje y montaje de las aspas del ventilador y la caja del interruptor NOTA DE INSTALACIÓN No conecte las aspas hasta que el ventilador esté totalmente instalado. Instalar el ventilador con las aspas colocadas podría ocasionar daños en las mismas. ▲...
Page 23
Ensamblaje y montaje de las aspas del ventilador y la caja del interruptor (cont.) 10. Ensamble la caja del interruptor a la unidad del adaptador con 3 tornillos. (Figura 6) 11. Vuelva a conectar la electricidad. El ventilador se encuentra ahora conectado y se puede encender y apagar por medio del control de velocidad de cadena de encendido/apagado.
Page 24
Lista de piezas Modelos FP7910OB Descripción Pieza N.º N.° de Ref. Unidad del soporte de suspensión APG610OB Unidad del barral/de la semiesfera que contiene: Unidad de la semiesfera Barral ADR1-6OB Pasador Pasador de horquilla Capuchón PG165OB AP1115OB Cubierta de unión del motor AMA7910OB Unidad del motor del ventilador Unidad de la caja/del adaptador del interruptor Mazo de cables...
Page 25
The Levon – FP7910OB Despiece ™ Figura 1 NOTA: la ilustración que se muestra no está hecha a escala y su configuración real puede variar. Producto / partes están sujetas a cambios sin previo aviso.
Page 26
Solución de problemas ▲ ADVERTENCIA Para su propia seguridad, desconecte la electricidad de la caja de fusibles o disyuntor antes de solucionar problemas en su ventilador. Problema Causa posible Solución sugerida 1. EL VENTILADOR NO 1. El fusible o el disyuntor están fundidos. 1.